21Ģ2 (Picture 7-5) The fixed scale of mixer and specified scale change or position mixer are not available to open at the same time, either-or. (Picture 7-4) 2) Click the Fixed ratio mixer to enter the interface of mixer setting, see picture (7-5). Environment temperature: Operating system: Windows/Mac/Linux Slicing software: Repetier-Host, EasyPrint 3D, Cura File format.gcode 2) Electrical Parameter Power input: 115/230VAC 50/60Hz Power output: DC24V/21A Max,500W Connectivity: TF card, USB Touch screen: 3.2 -Inch Full-color Touch Screen 3) Mechanical Parameter Printer size: 508x545圆57 mm 3 Package size: 670x560x320 mm 3 Net weight: 13.8kg Gross weight: 20.5kg 5Ģ1 (Picture 7-3) Two submenus 1) Click the hot bed temperature/extruder head temperature/speed to enter the interface of temperature and speed. 4ĥ 2 Printing Parameters 1) Printing Parameters Printing technology: FDM Printing volume: 320*320*420mm 3 Printing accuracy: 0.1~0.2mm Position precision: X/Y: 0.011mm Z: mm Printing speed: 60mm/s Nozzle quantity: 2-in-1-out single nozzle Nozzle diameter: 0.4mm Filament: diameter 1.75mm ABS/ PLA, etc. If there is any problem, please contact the after-sales service. 3) Please do not disassemble the printer without permission. 2) Make sure there is filament in feeding tubes on the both side of extruder head even using a single-sided extruder for monochrome printing, moreover the filament in the other feeding tube cannot be pulled out during the printing process. 1.3 Risk statement 1) Before color mixing or monochrome printing, make sure that there is the filament in the feeding tube on both sides of the extruder head to prevent back flushing of the molten filament inside the extruder head, resulting in clogging. We provide the spare nozzle in the accessory kit just in case. As a result, there may be filament residue in the extruder head or on the hot bed, but it should not affect normal use. 1.2Factory Test before Delivery To ensure quality, each printer is tested at the factory. ![]() 4) Don t leave the printer unattended when printing. 3) Don t touch extruder head or hot bed when printing as they generate high temperature which may cause burn. 2) Be sure all wires are correctly connected before turning on the printer. Be sure the switch is in the correct position or it will damage the power supply unit (PSU). Official site: us for technical support: Facebook Group: 3Ĥ 1Attentions 1.1Safety Instructions 1) Please switch to the correct local voltage (115V-230V) before turning on the printer. 3 Thank you for choosing Geeetech products! Please read the instruction manual carefully before using this machine.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |